🎯 This article is for admins looking to enable the Punch Clock feature on Planday. Need to manage and approve Punch Clock entries?

In Planday, you can record the presence and punctuality of employees with the Punch Clock functionality and prepare your payroll by approving shifts. Employees can use the Planday app to clock in and out. However, if required, you can release the function exclusively for use in a web browser via PunchClock.Planday.com

If you don't have access to the Punch Clock in your Planday account, you can have it activated. Don't hesitate to get in touch with our support team.


1 - Setup Punch Clock for use on a web browser

Register your IP addresses

This solution allows employees to punch in and out using a web browser by visiting PunchClock.Planday.com from their work premises. Access to this functionality requires an administrator of your Planday account to register the IP address from which to use the Punch Clock at work.


Follow these steps to enable this functionality:

  • Log in to your Planday account from a computer on a network your employees will be clocking in and out.

  • Navigate to Settings > Punch Clock section > Employee Access, then Web access section > Add.

Planday EN Screenshots for HC.001.png
  • Your Current IP address will be displayed here. Add this address if you are on the network where your employees will be clocking in and out.

  • Enter the desired IP address under Add IP. You can also provide a name and description. Example: Hafenstrasse location / This is the address of our café on Hafenstrasse.

  • Confirm by clicking on Save.

screenshot-cceteam.planday.com-2022.09.09-13_20_44.png

After the IP address is registered, your employees can punch in and out via PunchClock.Planday.com using their email address and password, provided they are connected to the internet via the registered IP address (WLAN network).

If you operate in multiple locations, you can also add the IP addresses of these locations. This ensures that employees can also clock in and out there.

What to do if your IP address is not recognized

If you cannot access PunchClock.Planday.com, your dynamic IP address has probably changed. Many internet service providers change their dynamic IP addresses from time to time. You may need to update your IP address in Punch Clock.

See the guidance above or follow this article on registering your IP address to edit your existing list or register more addresses.

Alternate: Use Punch Clock activation codes if you use dynamic IP addresses

See the article on Setting Activation codes for Punch Clock.

Alternate: Make punching in faster using PIN codes instead of passwords

See the article on Using PIN codes for Web Punch Clock.


2 - Punch Clock via app setup

How to set up Punch Clock for usage via the Planday app

Here's how to proceed if you want to give your employees access to the Punch Clock via the Planday app:

  • Navigate to Settings > Punch Clock section > Employee Access > Mobile App Access section.

  • Select Yes for Punch Clock used in mobile app and check ☑️ Punch Clock allowed in certain physical locations.

Set up geofencing for access through the mobile app

Geofencing is used so employees can only punch in and out if they are physically present in an area. Employees must stay in a predefined workplace; otherwise, they will not be allowed to punch in or out of their shifts. To set up, click Add new location.

  • Navigate to the map view. Enter your address in the search bar or drag and drop the location pin to the suitable place of your location.

  • Set up your geofencing radius by dragging the arrow icon. Planday recommends a radius of at least 100 meters, as a smaller radius may be affected by the smartphone's GPS accuracy or GPS interference in the area.

  • Add the departments whose employees are allowed to punch in and out of this location.

  • Give the location a name. Confirm by clicking on Save.

Planday EN Screenshots for HC.001.png

💡 After setting up your location, employees can only clock themselves in and out if they are within the specified radius and have GPS turned on their smartphone. For the Punch Clock to work through the app, Planday requires GPS or Location access - This is used solely to punch in and out, not to track locations or otherwise.

Give employees unrestricted access to clocking in and out

You may want to grant unrestricted access to the Punch Clock via the app so your employees can punch in and out at any location. To enable this option, check ☑️ Punch Clock allowed everywhere.

Limit the use of the Punch Clock to the Wi-Fi network at work

It is also possible to allow the Punch Clock to be used via the app when employees use the WIFI at their workplace without relying on geolocation. An IP address must be specified for this. To enable this option, check ☑️ Punch Clock allowed from the workplace Wi-Fi.

💡 If your employees are using iOS devices running iOS14 or later, the Planday app will require location services to be enabled to punch in and out.


Still have questions? Reach our support team via chat if you need help with this feature.

See related articles:

Did this answer your question?